|
|
|
|
|
|
Shurhold SIF3C Filter Funnel - Small - 3.5 GPM
|
List Price: $22.99 Sale Price: $18.45 You Save: $4.54
|
|
|
SIF3C Filter Funnel - Small - 3.5 GPM
Teflon-coated stainless steel filter separates water and dirt from gasoline, diesel and mixed 2-cycle fuels. Made from industrial standard electro conductive polypropylene that can be grounded for extra safety. Fuel flows quickly through the filter into the tank and water stays in the funnel. Filter Funnel is self-cleaning.
|
|
|
|
|
|
|
|
|
|
Shurhold SIF8C Filter Funnel - Medium - 5 GPM
|
List Price: $29.99 Sale Price: $27.29 You Save: $2.70
|
|
|
SIF8C Filter Funnel - Medium - 5 GPM
Teflon-Coated Stainless Steel Filter Separates Water And Dirt From Gasoline, Diesel And Mixed 2-Cycle Fuels. Made From Industrial Standard Electro Conductive Polypropylene That Can Be Grounded For Extra Safety. Fuel Flows Quickly Through The Filter Into The Tank And Water Stays In The Funnel. Filter Funnel is self-Cleaning.
|
|
|
|
|
|
|
|
|
|
Shurhold SIF15C Filter Funnel - Large - 15 GPM
|
List Price: $59.99 Sale Price: $57.74 You Save: $2.25
|
|
|
SIF15C Filter Funnel - Large - 15 GPM
Teflon-coated stainless steel filter separates water and dirt from gasoline, diesel and mixed 2-cycle fuels. Made from industrial standard electro conductive polypropylene that can be grounded for extra safety. Fuel flows quickly through the filter into the tank and water stays in the funnel. Filter Funnel is self-cleaning.
|
|
|
|
|
|
|
|
|
|
Maretron Fuel Flow Sensor - 2-100 LPH
|
List Price: $395.00 Sale Price: $350.26 You Save: $44.74
|
|
|
Fuel Flow Sensor - 2-100 LPH
Features:
- Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH)
- All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1/4" NPT female threads
- Nominal K Factor: 1000 pulses/L (3785.4 pulses/Gal)
- Cable Length: 1m (3.28')
- Strainer Size: 200 Mesh (If not already installed after fuel filter)
- Port Size: 1/4" NPT Female
- Maximum Viscosity: 1000 cPs
- Maximum Operating Pressure: 68.95 Bar (1000 PSI)
- Weight: 775g (1.71 lb)
- Construction: Aluminum Housing Material
- Rotors: PPS (Ryton)
- Shafts: 316/304 Stainless Steel
- Magnets: Samarium Cobalt
- O-Ring: FKM (Viton™)
|
|
|
|
|
|
|
|
|
|
Maretron Fuel Flow Sensor 200 to 1000HP
|
List Price: $495.00 Sale Price: $425.76 You Save: $69.24
|
|
|
Fuel Flow Sensor 200 to 1000 HP (4 to 132 GPH, 15 to 500 LPH)
|
|
|
|
|
|
|
|
|
|
Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH
|
List Price: $495.00 Sale Price: $425.76 You Save: $69.24
|
|
|
Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH
Features:
- Operating Temperature: -40°C to 80°C (-40°F to 176°F)
- Storage Temperature: -65°C to 170°C (-85°F to 338°F)
- Port Size: 1/4" NPT Female
- Cable Length: 1M (3.28 ft)
- Maximum Viscosity: 1000 cPs
- Pressure: 68.95 Bar (1000 PSI)
- Strainer Size: 200 Mesh (If not already installed after fuel filter)
|
|
|
|
|
|
|
|
|
|
FloScan 7200-20B-1 Fuel Meter - I/B, I/O & O/B - 350HP Max - White
|
List Price: $785.00 Sale Price: $451.38 You Save: $333.62
|
|
|
7200-20B-1 Fuel Meter - I/B, I/O & O/B - 350HP Max - White
FloScan's 7000 Multifunction Series 7000 Multifunction Meter combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, and Fuel Totalizer in a single 3-3/8" diameter instrument which fits the panel space of a standard tach.
This is a popular option is to replace the existing tach(s) with this system thus eliminating the need to cut new holes in the panel.
Features:
- Fuel Type: Gas Engine
- Qty: SingleEngine
- Type: Inboard, Outboard, Inboard/Outboard
- Fuel Sensor: 20BMax
- Horse Power: 350HP
- Color: White
Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy. Simultaneous independent display of Engine Hour Time, RPM, GPH, and gallons consumed.RPM readout accurate to 10 RPM. Easily connects to existing tach signal wires.GPH and Totalizer readings displayed in tenths of a gallon. Totalizer capacity up to 99,999 gallonsDual color (amber/green) backlighting of LCD provides for easy night viewing.Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading. Meter fits 3-3/8" panel opening (standard tach size). Can replace existing tachs in panel.
|
|
|
|
|
|
|
|
|
|
FloScan 7000-231-11 Fuel Meter - I/B, I/O - 351-550HP
|
List Price: $885.00 Sale Price: $508.88 You Save: $376.12
|
|
|
Fuel Meter - I/B, I/O - 351-550HP
FloScan's 7000 Multifunction Meter combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, and Fuel Totalizer in a single 3-3/8" diameter instrument which fits the panel space of a standard tach. A popular option is to replace the existing tach(s) with this system thus eliminating the need to cut new holes in the panel.
Features:
- Fits most gas engines rated from 25 hp to 2000 hp
- Twin gas models available
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy
- Simultaneous independent display of Engine Hour Time, RPM, GPH, and gallons consumed
- RPM readout accurate to 10 RPM
- Easily connects to existing tach signal wires
- GPH and Totalizer readings displayed in tenths of a gallon
- Totalizer capacity up to 99,999 gallons
- Dual color (amber/green) backlighting of LCD provides for easy night viewing
- Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading
- Twin gas models also incorporate an Engine Synchronizer Indicator and Port/Stbd GPH selection
- 2 additional SPST toggle switches are required for accessing these features
- Meter fits 3-3/8" panel opening (standard tach size)
- Can replace existing tachs in panel
- Models available in black or white (bezel/dial face)
- Uses Model 20A, 2OB, 231, and 233 Series flow sensors designed for gas engines
Applications:
- Fits all carbureted inboard and stern drive engines up to 350 hp
- Fits all EFI inboard and stern drive engines (including Mercruiser and Volvo) with closed loop fuel return systems
- Fits all Mercury Optimax, Evinrude Ficht, Yamaha HPDI, and Honda 4-stroke engines
- Fits all 2-stroke EFI outboard engines
|
|
|
|
|
|
|
|
|
|
FloScan 9200-20B-1 Fuel Meter - I/B, O/B & I/O - 350HP Max - White
|
List Price: $993.00 Sale Price: $570.98 You Save: $422.02
|
|
|
9200-20B-1 Fuel Meter - I/B, O/B & I/O - 350HP Max - White
FloScan's Series 9000 GPS Interface System combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, Fuel Totalizer and nautical Miles Per Gallon over the ground in a single 3-3/8" diameter instrument which fits the panel space of a standard tachometer. The speed signal required to calculate the nMPG reading is obtained from GPS and Loran systems having a NMEA 0183 serial port output. The direct display of nautical Miles Per Gallon over the ground gives the skipper a powerful new tool to set optimum fuel efficiency under all conditions and to determine precisely how far he can go with his remaining fuel.
Features:
- Fuel Type: Gas Engine
- Qty: Single
- Engine Type: Inboard, Outboard, Inboard/Outboard
- Fuel Sensor: 20BMax
- Horse Power: 350HP
- Color: White
|
|
|
|
|
|
|
|
|
|
Maretron Fuel Flow Sensor f/FFM100 Fuel Flow Monitor
|
List Price: $695.00 Sale Price: $597.78 You Save: $97.22
|
|
|
Fuel Flow Sensor f/FFM100 Fuel Flow Monitor
Flow range: 48 to 396 GPH, 180 to 1500 LPH
|
|
|
|
|
|
|
|
|
|
FloScan 7000-231-21 Fuel Meter - I/B, I/O - 351-550HP
|
List Price: $1,090.00 Sale Price: $626.75 You Save: $463.25
|
|
|
Fuel Meter - I/B, I/O - 351-550HP
FloScan's 7000 Multifunction Meter combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, and Fuel Totalizer in a single 3-3/8" diameter instrument which fits the panel space of a standard tach. A popular option is to replace the existing tach(s) with this system thus eliminating the need to cut new holes in the panel.
Features:
- Fits most gas engines rated from 25 hp to 2000 hp
- Twin gas models available
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy
- Simultaneous independent display of Engine Hour Time, RPM, GPH, and gallons consumed
- RPM readout accurate to 10 RPM
- Easily connects to existing tach signal wires
- GPH and Totalizer readings displayed in tenths of a gallon
- Totalizer capacity up to 99,999 gallons
- Dual color (amber/green) backlighting of LCD provides for easy night viewing
- Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading
- Twin gas models also incorporate an Engine Synchronizer Indicator and Port/Stbd GPH selection
- 2 additional SPST toggle switches are required for accessing these features
- Meter fits 3-3/8" panel opening (standard tach size)
- Can replace existing tachs in panel
- Models available in black or white (bezel/dial face)
- Uses Model 20A, 2OB, 231, and 233 Series flow sensors designed for gas engines
Applications:
- Fits all carbureted inboard and stern drive engines up to 350 hp
- Fits all EFI inboard and stern drive engines (including Mercruiser and Volvo) with closed loop fuel return systems
- Fits all Mercury Optimax, Evinrude Ficht, Yamaha HPDI, and Honda 4-stroke engines
- Fits all 2-stroke EFI outboard engines
|
|
|
|
|
|
|
|
|
|
FloScan 9000-231-11 Fuel Meter - I/B, I/O - 351-550HP
|
List Price: $628.48 Sale Price: $628.48
|
|
|
Fuel Meter - I/B, I/O - 351-550HP
FloScan's Series 9000 GPS Interface System combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, Fuel Totalizer and nautical Miles Per Gallon over the ground in a single 3-3/8" diameter instrument which fits the panel space of a standard tachometer. The speed signal required to calculate the MPG reading is obtained from GPS and Loran systems having a NMEA 0183 serial port output. The direct display of nautical Miles Per Gallon over the ground gives the skipper a powerful new tool to set optimum fuel efficiency under all conditions and to determine precisely how far he can go with his remaining fuel.
Features:
- Fits most gas engines rated from 25 hp to 2000 hp. Twin gas models available
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy
- Simultaneous independent display of Engine Hour Time, RPM, GPH, gallons consumed, and nautical MPG
- Twin gas model displays the MPG rate for BOTH engines underway
- RPM readout accurate to 10 RPM. Easily connects to existing tach signal wires
- GPH and Totalizer readings displayed in tenths of a gallon. Totalizer capacity up to 99,999 gallons
- Dual color (amber/green) backlighting of LCD provides for easy night viewing
- Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading
- Single and twin engine models require 1 SPST toggle switch for accessing MPG reading
- Twin gas models also incorporate an Engine Synchronizer Indicator and Port/Stbd GPH selection
- 2 additional SPST toggle switches are required for accessing these features
- Meter fits 3-3/8" panel opening (standard tach size)
- Can replace existing tachs in panel
- Models available in black or white (bezel/dial face)
- Uses Model 20A, 2OB, 231, and 233 Series flow sensors designed for gas engines
Applications:
- Fits all carbureted inboard and stern drive engines up to 350 hp
- Fits all EFI inboard and stern drive engines (including Mercruiser and Volvo) with closed loop fuel return systems
- Fits all Mercury Optimax, Evinrude Ficht, Yamaha HPDI, and Honda 4-stroke engines
- Fits all 2-stroke EFI outboard engines
|
|
|
|
|
|
|
|
|
|
FloScan 9000-231-21 Fuel Meter - I/B, I/O - 351-550HP
|
List Price: $1,333.00 Sale Price: $766.48 You Save: $566.52
|
|
|
Fuel Meter - I/B, I/O - 351-550HP
FloScan's Series 9000 GPS Interface System combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, Fuel Totalizer and nautical Miles Per Gallon over the ground in a single 3-3/8" diameter instrument which fits the panel space of a standard tachometer. The speed signal required to calculate the MPG reading is obtained from GPS and Loran systems having a NMEA 0183 serial port output. The direct display of nautical Miles Per Gallon over the ground gives the skipper a powerful new tool to set optimum fuel efficiency under all conditions and to determine precisely how far he can go with his remaining fuel.
Features:
- Fits most gas engines rated from 25 hp to 2000 hp. Twin gas models available
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy
- Simultaneous independent display of Engine Hour Time, RPM, GPH, gallons consumed, and nautical MPG
- Twin gas model displays the MPG rate for BOTH engines underway
- RPM readout accurate to 10 RPM. Easily connects to existing tach signal wires
- GPH and Totalizer readings displayed in tenths of a gallon. Totalizer capacity up to 99,999 gallons
- Dual color (amber/green) backlighting of LCD provides for easy night viewing
- Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading
- Single and twin engine models require 1 SPST toggle switch for accessing MPG reading
- Twin gas models also incorporate an Engine Synchronizer Indicator and Port/Stbd GPH selection
- 2 additional SPST toggle switches are required for accessing these features
- Meter fits 3-3/8" panel opening (standard tach size)
- Can replace existing tachs in panel
- Models available in black or white (bezel/dial face)
- Uses Model 20A, 2OB, 231, and 233 Series flow sensors designed for gas engines
Applications:
- Fits all carbureted inboard and stern drive engines up to 350 hp
- Fits all EFI inboard and stern drive engines (including Mercruiser and Volvo) with closed loop fuel return systems
- Fits all Mercury Optimax, Evinrude Ficht, Yamaha HPDI, and Honda 4-stroke engines
- Fits all 2-stroke EFI outboard engines
|
|
|
|
|
|
|
|
|
|
FloScan N20G-20B-1 FloNET® NMEA 2000 Fuel Flow System w/20B Sensor
|
List Price: $1,500.00 Sale Price: $958.33 You Save: $541.67
|
|
|
FloNET® NMEA 2000 Fuel Flow System w/20B Sensor
The FloNET® Gas Series is designed to interface with a NMEA 2000 network. The FloNET Interface hub takes current fuel rate values and broadcasts it to the network via PGN 65280 (FloScan Fuel Rate) and PGN 65281 (FloScan Fuel Total). The data is also broadcast simultaneously under PGN 127489 (Engine Parameters Dynamic) and PGN 127497 (Engine Trip Parameters).
Marine electronics manufacturers can now incorporate FloScan fuel flow information as part of their product offering. Garmin, Lowrance, Simrad and Nobeltec are a few of the manufacturers that offer immediate product compatibility. Data that can be displayed by these manufacturers may include:
- Gallons/Liters per hour
- Gallons/Liters consumed
- Gallons/Liters remaining
- Nautical miles per gallon / Liters per nautical mile
- Distance to empty
|
|
|
|
|
|
|
|
|
|
FloScan N20G-231-1 FloNET® NMEA 2000 Fuel Flow System w/231 Sensor
|
List Price: $1,500.00 Sale Price: $958.33 You Save: $541.67
|
|
|
FloNET® NMEA 2000 Fuel Flow System w/231 Sensor
The FloNET® Gas Series is designed to interface with a NMEA 2000 network. The FloNET Interface hub takes current fuel rate values and broadcasts it to the network via PGN 65280 (FloScan Fuel Rate) and PGN 65281 (FloScan Fuel Total). The data is also broadcast simultaneously under PGN 127489 (Engine Parameters Dynamic) and PGN 127497 (Engine Trip Parameters).
Marine electronics manufacturers can now incorporate FloScan fuel flow information as part of their product offering. Garmin, Lowrance, Simrad and Nobeltec are a few of the manufacturers that offer immediate product compatibility. Data that can be displayed by these manufacturers may include:
- Gallons/Liters per hour
- Gallons/Liters consumed
- Gallons/Liters remaining
- Nautical miles per gallon / Liters per nautical mile
- Distance to empty
|
|
|
|
|
|
|
|
|
|
FloScan 7000-33C-1 Fuel Meter - I/B, I/O - 551+ HP
|
List Price: $1,995.00 Sale Price: $1,147.12 You Save: $847.88
|
|
|
Fuel Meter - I/B, I/O - 551+ HP
FloScan's 7000 Multifunction Meter combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, and Fuel Totalizer in a single 3-3/8" diameter instrument which fits the panel space of a standard tach. A popular option is to replace the existing tach(s) with this system thus eliminating the need to cut new holes in the panel.
Features:
- Fits most gas engines rated from 25 hp to 2000 hp
- Twin gas models available
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy
- Simultaneous independent display of Engine Hour Time, RPM, GPH, and gallons consumed
- RPM readout accurate to 10 RPM
- Easily connects to existing tach signal wires
- GPH and Totalizer readings displayed in tenths of a gallon
- Totalizer capacity up to 99,999 gallons
- Dual color (amber/green) backlighting of LCD provides for easy night viewing
- Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading
- Twin gas models also incorporate an Engine Synchronizer Indicator and Port/Stbd GPH selection
- 2 additional SPST toggle switches are required for accessing these features
- Meter fits 3-3/8" panel opening (standard tach size)
- Can replace existing tachs in panel
- Models available in black or white (bezel/dial face)
- Uses Model 20A, 2OB, 231, and 233 Series flow sensors designed for gas engines
Applications:
- Fits all carbureted inboard and stern drive engines up to 350 hp
- Fits all EFI inboard and stern drive engines (including Mercruiser and Volvo) with closed loop fuel return systems
- Fits all Mercury Optimax, Evinrude Ficht, Yamaha HPDI, and Honda 4-stroke engines
- Fits all 2-stroke EFI outboard engines
|
|
|
|
|
|
|
|
|
|
FloScan 9000-33C-1 Fuel Meter - I/B, I/O - 551+ HP
|
List Price: $2,267.00 Sale Price: $1,269.52 You Save: $997.48
|
|
|
Fuel Meter - I/B, I/O - 551+ HP
FloScan's Series 9000 GPS Interface System combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, Fuel Totalizer and nautical Miles Per Gallon over the ground in a single 3-3/8" diameter instrument which fits the panel space of a standard tachometer. The speed signal required to calculate the MPG reading is obtained from GPS and Loran systems having a NMEA 0183 serial port output. The direct display of nautical Miles Per Gallon over the ground gives the skipper a powerful new tool to set optimum fuel efficiency under all conditions and to determine precisely how far he can go with his remaining fuel.
Features:
- Fits most gas engines rated from 25 hp to 2000 hp. Twin gas models available
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy
- Simultaneous independent display of Engine Hour Time, RPM, GPH, gallons consumed, and nautical MPG
- Twin gas model displays the MPG rate for BOTH engines underway
- RPM readout accurate to 10 RPM. Easily connects to existing tach signal wires
- GPH and Totalizer readings displayed in tenths of a gallon. Totalizer capacity up to 99,999 gallons
- Dual color (amber/green) backlighting of LCD provides for easy night viewing
- Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading
- Single and twin engine models require 1 SPST toggle switch for accessing MPG reading
- Twin gas models also incorporate an Engine Synchronizer Indicator and Port/Stbd GPH selection
- 2 additional SPST toggle switches are required for accessing these features
- Meter fits 3-3/8" panel opening (standard tach size)
- Can replace existing tachs in panel
- Models available in black or white (bezel/dial face)
- Uses Model 20A, 2OB, 231, and 233 Series flow sensors designed for gas engines
Applications:
- Fits all carbureted inboard and stern drive engines up to 350 hp
- Fits all EFI inboard and stern drive engines (including Mercruiser and Volvo) with closed loop fuel return systems
- Fits all Mercury Optimax, Evinrude Ficht, Yamaha HPDI, and Honda 4-stroke engines
- Fits all 2-stroke EFI outboard engines
|
|
|
|
|
|
|
|
|
|
FloScan 7000-33C-2 Fuel Meter - I/B, I/O - 551+ HP
|
List Price: $2,760.00 Sale Price: $1,545.60 You Save: $1,214.40
|
|
|
Fuel Meter - I/B, I/O - 551+ HP
FloScan's 7000 Multifunction Meter combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, and Fuel Totalizer in a single 3-3/8" diameter instrument which fits the panel space of a standard tach. A popular option is to replace the existing tach(s) with this system thus eliminating the need to cut new holes in the panel.
Features:
- Fits most gas engines rated from 25 hp to 2000 hp
- Twin gas models available
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy
- Simultaneous independent display of Engine Hour Time, RPM, GPH, and gallons consumed
- RPM readout accurate to 10 RPM
- Easily connects to existing tach signal wires
- GPH and Totalizer readings displayed in tenths of a gallon
- Totalizer capacity up to 99,999 gallons
- Dual color (amber/green) backlighting of LCD provides for easy night viewing
- Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading
- Twin gas models also incorporate an Engine Synchronizer Indicator and Port/Stbd GPH selection
- 2 additional SPST toggle switches are required for accessing these features
- Meter fits 3-3/8" panel opening (standard tach size)
- Can replace existing tachs in panel
- Models available in black or white (bezel/dial face)
- Uses Model 20A, 2OB, 231, and 233 Series flow sensors designed for gas engines
Applications:
- Fits all carbureted inboard and stern drive engines up to 350 hp
- Fits all EFI inboard and stern drive engines (including Mercruiser and Volvo) with closed loop fuel return systems
- Fits all Mercury Optimax, Evinrude Ficht, Yamaha HPDI, and Honda 4-stroke engines
- Fits all 2-stroke EFI outboard engines
|
|
|
|
|
|
|
|
|
|
FloScan 9000-33C-2 Fuel Meter - I/B, I/O - 551+ HP
|
List Price: $3,047.00 Sale Price: $1,706.32 You Save: $1,340.68
|
|
|
Fuel Meter - I/B, I/O - 551+ HP
FloScan's Series 9000 GPS Interface System combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, Fuel Totalizer and nautical Miles Per Gallon over the ground in a single 3-3/8" diameter instrument which fits the panel space of a standard tachometer. The speed signal required to calculate the MPG reading is obtained from GPS and Loran systems having a NMEA 0183 serial port output. The direct display of nautical Miles Per Gallon over the ground gives the skipper a powerful new tool to set optimum fuel efficiency under all conditions and to determine precisely how far he can go with his remaining fuel.
Features:
- Fits most gas engines rated from 25 hp to 2000 hp. Twin gas models available
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy
- Simultaneous independent display of Engine Hour Time, RPM, GPH, gallons consumed, and nautical MPG
- Twin gas model displays the MPG rate for BOTH engines underway
- RPM readout accurate to 10 RPM. Easily connects to existing tach signal wires
- GPH and Totalizer readings displayed in tenths of a gallon. Totalizer capacity up to 99,999 gallons
- Dual color (amber/green) backlighting of LCD provides for easy night viewing
- Requires 1 Momentary ON/Constant OFF toggle button switch for resetting fuel totalizer reading
- Single and twin engine models require 1 SPST toggle switch for accessing MPG reading
- Twin gas models also incorporate an Engine Synchronizer Indicator and Port/Stbd GPH selection
- 2 additional SPST toggle switches are required for accessing these features
- Meter fits 3-3/8" panel opening (standard tach size)
- Can replace existing tachs in panel
- Models available in black or white (bezel/dial face)
- Uses Model 20A, 2OB, 231, and 233 Series flow sensors designed for gas engines
Applications:
- Fits all carbureted inboard and stern drive engines up to 350 hp
- Fits all EFI inboard and stern drive engines (including Mercruiser and Volvo) with closed loop fuel return systems
- Fits all Mercury Optimax, Evinrude Ficht, Yamaha HPDI, and Honda 4-stroke engines
- Fits all 2-stroke EFI outboard engines
|
|
|
|
